Wonky Log Cabin Quilt Pattern

Wonky log cabin quilt

Wonky log cabin quilt

I have made this wonky log cabin quilt in its most simple form.  My main aim was to show you that you don’t have to use foundation piecing.  This simple rectangular quilt can be made with normal piecing – and it’s great fun.  I used it as a scrappy quilt and it ended up being a memory quilt as well.  As I rummaged through my stash I came across some lovely fabrics that I had forgotten about.

The quilt measures about 57″ by 74″, requiring twelve blocks which are 17″ square finished size.  I used about 2.1/2 yards of the grey background fabric together with about 8 red strips (3/4 yard), 14 blue strips (1 yard) and a further 3.1/2″ strip of red for the central squares and 3/4 yard of a dark fabric for the border.  The strips are all 2.1/2″ wide, so that you can used jelly roll leftover strips if you wish.




Wonky log cabin quilt block

Wonky log cabin quilt block

Cutting requirements for the wonky log cabin quilt

3.1/2″ squares:  twelve red

2.1/2″ strips:  approximately 35 grey, 8 red and 14 blue

For the border you will need to cut seven 3.1/2″ strips across the width of fabric.

Make the first round

Begin with a red square

Begin with a red square

Log cabin blocks traditionally have a red square in the middle to represent the fire in the hearth of the log cabin.  I have used a red metallic fabric for this.  Sew a 3.1/2″ grey strip to the bottom of the square and a 5.1/2″ strip to the left hand side.

Cut a triangle off

Cut a triangle off

Place your ruler so that it runs from the bottom right hand corner of this section to a point 2″ up from the bottom left hand corner.  Cut this triangle shape off.

Add the remaining logs

Add the remaining logs

Now add a 5.1/2″ grey strip across the top and a 7.1/2″ strip down the right hand side of the red square.

The progression in the photo runs down the left hand side and then down the right hand side of the photo.  Cut a triangle from the left hand side, top and then right hand sides of the section.  In each case the triangle runs from one corner to a point 2″ from the next corner.  This completed section measures about 5.1/2″ or 6″ square.

Add the red strips

Add the red strips

Make the second round of logs

For the next round I have used red strips.  They are from stash so each side is different.  Begin with a strip across the bottom and then add strips in a clockwise direction around the section.

Speed piecing log cabin blocks

Speed piecing log cabin blocks

Speed piecing log cabin blocks

I am using speed piecing for the rest of the block so I am not specifying lengths here.  This involves taking one strip of red fabric and sewing several blocks to it.  Place the red strip with right side up and then place a block with right side down against the red strip.  When you reach the bottom of the block, place another block to butt up against the first block and continue sewing.  At the end of the strip repeat with another red strip until you have added another red strip to every block.  Separate the blocks by cutting across the strip between each block.  This means that you don’t have to measure and cut each strip so it saves a huge amount of time.

Trim the red strips

Trim the red strips

Continue until you have added red strips to all four sides of the section.  Trim a triangle from each edge.  In this case place your ruler to run from one corner to a point only 1″ from the following corner.  This section measures about 9″ or 9.1/2″ square.

One of the reasons that I have varied the size of the triangles is because I wanted the coloured frames to stand out well so that you can see how the block has built up clearly.  So I have taken 2″ triangles from the grey frames and 1″ triangles from the coloured frames.

Third round of logs

Third round of logs

Complete the wonky log cabin quilt blocks

For the next round of logs use 2.1/2″ grey strips.  Cut 2″ triangles from this round.  This section measures about 11″ square.

Add the blue strips

Add the blue strips

I have used blue strips for the fourth round of logs, cutting 1″ triangles from each edge.  At this stage the block measures about 13.1/2″ to 14″ square.

Add the grey strips

Add the grey strips

Make the final round of logs with grey strips.  Don’t cut any triangles from this round of logs.

As I was cutting triangles from the previous frames I wasn’t worrying too much about accuracy.  The final reckoning comes now with the final grey frame.  The edges of all my blocks varied between 17.1/2″ and 18″ long.  At this stage I trimmed all the blocks to 17.1/2″ square.  What size you use for your blocks doesn’t matter.  The important point is that all blocks need to be the same size as each other so that you can sew them together.

Sew the blocks in rows of three

Sew the blocks in rows of three

Assemble the wonky log cabin quilt

Sew the blocks together in four rows of three blocks.  Sew the rows to each other.

Add the quilt border

Add the quilt border

For the border I have used 3.1/2″ strips of a dark fabric to frame the quilt.  You’ll need two lengths of approximately 51.1/2″ for the top and bottom and two lengths of approximately 74.1/2″ for the sides.  Do measure your quilt edges as they may vary slightly from mine.

That completes the wonky log cabin quilt top.  It is now ready for layering, quilting and binding.  Full details of these steps can be found in the quilting for beginners section.

Here’s the video:

Snow in my garden

Snow in my garden

I can’t bring you any travel photos this week as I have hardly left the house all week.  We haven’t had nearly as much snow as most parts of the UK, but I still didn’t feel it was worth risking slipping on icy pavements when I didn’t really have any urgent reason to leave the house.

I hope that wherever you live you are safe and warm.