Floor Tile Lap Quilt Pattern

Floor tile quilt

Floor tile quilt

This floor tile lap quilt design is based loosely on some floor tiles that I saw in the V&A museum – that place is a treasure trove of design ideas!  I have added some more colour to the blocks.  For the central area I added a design that is more usual around the edges of tile designs.  In the original floor tiles you can see that they have used plain squares for the alternate while I have repeated the nine patch block, but with different colours.

Floor tile design

Floor tile design

The quilt measures 38″ square, using 1/2 yard each of cream and light purple, 3/4 yard of purple and 1/4 yard of brown fabric.  I have used nine 10″ square finished size blocks with two borders.

As ever, you can buy these fabrics at a discount in this week’s special offer.




Completed quilt blocks

Completed quilt blocks

Cutting requirements for the floor tile quilt

2.1/2″ squares:  twenty brown, twenty light purple, sixteen cream, sixteen purple

6.1/2″ by 2.1/2″ strips:  eight cream, eight purple

10.1/2″ by 2.1/2″ strips:  eight cream, eight purple

1.1/2″ by 5.1/2″ strips:  eight cream, four light purple, four purple, four brown

For the borders you will need to cut four 2.1/2″ strips of light purple and of purple, all across the width of fabric.

Using strip piecing

Using strip piecing

Make the first block

I have used strip piecing, but this is perhaps a bit wasteful of fabric unless you want more of the blocks for another project, as I did.  You may prefer just to cut individual squares and sew them together.  However if you are using strip piecing, sew together 2.1/2″ strips along the length.  You need to make panels in dark, light, dark and in light, dark, light.  Cut these panels at 2.1/2″ intervals.  This produces rectangles 2.1/2″ by 6.1/2″ made up of three squares.

Make the nine patch block

Make the nine patch block

Place a dark, light, dark strip at top and bottom with a light, dark, light strip between them.  Sew these strips to each other.  This creates a simple nine patch block.

Add a cream frame

Add a cream frame

Now add a 2.1/2″ frame around the nine patch block.  Add 6.1/2″ strips of cream to the top and bottom with two 10.1/2″ strips down the sides.

That completes the first quilt block.  It measures 10.1/2″ square at the moment and you need to make four of them.

Second quilt block layout

Second quilt block layout

Make the second quilt block

The second block is the same basic design as the first block.  This time I have switched the colours, using purple and light purple.  I have placed the dark fabric (purple) where in the first block I had placed light fabric (cream).  This was to add a bigger contrast between the blocks.

This block also measures 10.1/2″ square at this stage and you need to make four of them.

Use strip piecing again

Use strip piecing again

Make the central block

In the middle of the quilt I have used a railfence/piano keys type of block.  Again I used strip piecing, sewing together 1.1/2″ strips of cream, light purple, brown, cream and purple.  Cut this panel at 5.1/2″ intervals to create squares.

Sew together four squares

Sew together four squares

Sew four of these squares together, laying them so that the stripes are alternately vertical and horizontal.  I have chosen to place them so that the cream stripe is on the outside in each square.

The block measures 10.1/2″ square and you need to make one only.

Sew the rows together

Sew the rows together

Assemble the floor tile lap quilt

Sew the blocks together in three rows of three.  In rows one and three use a brown block at each end with a purple block between them.  For row three place a purple block at each end with the stripey block between them.  Sew the blocks together across each row and then sew the rows to each other.

Add the quilt borders

Add the quilt borders

Add the quilt borders

For the first border I have used 2.1/2″ strips of light purple fabric.  You will need two lengths of 30.1/2″ for the top and bottom with two lengths of 34.1/2″ for the sides.  In the second border I have used 2.1/2″ strips of dark purple – two lengths of 34.1/2″ for the top and bottom with two lengths of 38.1/2″ for the sides.

That completes the floor tile lap quilt top.  It is now ready for layering, quilting and binding.  Full details of these steps can be found in the beginner quilting section.

Here’s the video:

https://youtu.be/vw4NQua5vm8

Bradford by night

Bradford by night

Last time I visited Bradford to buy fabric I decided to visit the city itself rather than just the fabric warehouse.  What a lovely surprise it was – a lovely city.  To see my photos click on Bradford City or on the photo.

Edgbaston cricket ground

Edgbaston cricket ground

My daughter was clever enough to get tickets for one of the World Cup cricket matches held here in Birmingham and on Wednesday we watched the New Zealand/South Africa match at Edgbaston.  What an exciting match it was, with the result hanging in the balance right up to the last over.  Definitely a day to remember!

Pinwheel Star Quilt Pattern

Pinwheel star quilt

Pinwheel star quilt

For the pinwheel star quilt pattern I have used three different quilt blocks – all very simple ones.  The quilt is a good lap quilt size (41″ square) and comes together really quickly.  There aren’t even too many half square triangles!  I’ve used 3/4 yard each of red, blue and cream fabrics to make nine quilt blocks which are all 9″ finished size, together with three borders in the same colours.  Together they come together to make a pretty star with pinwheels in the quilt corners.

You can buy these fabrics at a 10% discount in this week’s special offer.




Cutting requirements for the pinwheel star quilt

Completed quilt blocks

Completed quilt blocks

4.3/8″ squares:  eight blue, eight cream

3.7/8″ squares:  six blue, six cream

3.1/2″ squares:  one blue

1.1/2″ by 7.1/2″ strips:  ten red

1.1/2″ by 9.1/2″ strips:  ten red

2.1/2″ by 3.1/2″ strips:  two cream

2.1/2″ by 7.1/2″ strips:  two cream

3.1/2″ by 9.1/2″ strips:  four blue, four cream

For the borders you will need to cut four 3.1/2″ cream strips across the width of fabric, four 1.1/2″ blue strips and four 3.1/2″ red strips

Central quilt block layout

Central quilt block layout

Making the central quilt block

Begin with a 3.1/2″ blue square in the middle.  Sew a 3.1/2″ cream strip to top and bottom and a 7.1/2″ cream strip to each side.

Sew a 7.1/2″ red strip to the top and bottom and finally sew a 9.1/2″ red strip to each side.

You only need to make one of this block.

Making the pinwheel quilt block

Make half square triangle units

Make half square triangle units

Make half square triangles using the 4.3/8″ squares.  Place a blue and a cream square with right sides together and mark a line along the diagonal.  Sew a 1/4″ seam either side of the marked line and cut along the line.  This will produce two half square triangle units which are now 4″ squares.

Pinwheel quilt block layout

Pinwheel quilt block layout

Use four half square triangles for each pinwheel.  Place them in two pairs as shown.  Sew the pairs together and then sew the pairs to each other to make a four patch unit.

Sew a 7.1/2″ red strip to the top and bottom of the block and then sew a 9.1/2″ red strip to each side.

You need to make four of these blocks.

Making the stripey quilt block

Stripey quilt block layout

Stripey quilt block layout

Make half square triangle units with the 3.7/8″ squares.  Place three of these side by side with the blue triangles in the top left.

The rest of the block is made using a blue 3.1/2″ by 9.1/2″ strip at the top, then a cream strip and finally the half square triangles.

Sew the half square triangles together first and then sew the rows to each other.  You need to make four of this block.

Assembling the pinwheel star quilt

Pinwheel star quilt layout

Pinwheel star quilt layout

Lay the blocks out in three rows of three.  The first row is made with a stripey block in the middle and a pinwheel block on either side.  The stripey block is placed with the triangles on the bottom.

The second row is made with the central block in the middle and a stripey block on either side.  These are placed so that the triangles run along the edges of the central block.

The third row is made with a stripey block in the middle and a pinwheel block on either side.  The stripey block is placed so that the triangles are at the top of the block.

Sew the blocks together across each row and then sew the rows to each other.

First quilt border

First quilt border

For the first border I have used 3.1/2″ strips of cream fabric.  You’ll need two lengths of 27.1/2″ for the top and bottom and two lengths of 33.1/2″ for the sides.

The second border is made using 1.1/2″ strips of blue.  You’ll need two lengths of 33.1/2″ for the top and bottom and two lengths of 35.1/2″ for the sides.

Final border for the pinwheel star quilt

Final border for the pinwheel star quilt

Finally for the third border I have enclosed the quilt with 3.1/2″ strips of red – two lengths of 35.1/2″ for the top and bottom and two lengths of 41.1/2″ for the sides.

That completes the pinwheel star quilt top.  It is now ready for layering, quilting and binding.  Full details of these steps can be found in the quilting for beginners section.

Here’s the video:

Facing Africa - NOMA

Facing Africa – NOMA

Recently I have become aware of a small charity that gives extraordinary help to individual people with a dreadful disease called NOMA.  I am so impressed with what they do that I feel I want to help them as much as I can.  I have set up a Just Giving page for donations and I am going to donate all the proceeds of my quilt sales to them.  You can find out more about them either by clicking on the photo or by clicking on Facing Africa – NOMA.