MakingDuvet Covers – Pattern andTutorial

Making duvet covers

Making duvet covers

Making duvet covers is easy to do and allows you to choose your own fabrics to match the rest of the room.  They also make quick gifts.  I’ve made a single duvet cover here but of course you can make any size – the method is the same whatever size duvet you are covering.

Making duvet covers – measurements

My duvet measures 52.1/2″ by 74″.  I have added 1″ to the width and 2″ to the length so I am cutting my fabric 53.1/2″ by 76″.  You can make any size cover – just measure your own duvet first.  I’m using crease resistant cotton 60″ wide so that makes it even more easy to make the cover – no piecing involved.

I have used two different colour fabrics – partly so that my duvet cover will be reversible and partly so that the photos will be more clear for you to follow what I am doing.  I have used 40″ of popper tape – most haberdashers will stock this, but mine came from Dunelm.  You can buy the kit for this single duvet cover here.

Sew pieces with wrong sides together

Sew pieces with wrong sides together

Sewing the sides and top

I’m using French seams so that there is no chance of any fraying on the inside of the duvet cover.  So begin by placing your two rectangles with wrong sides together.  Sew a 1/4″ seam on three sides – one short edge and both long edges, creating a pouch.

Press the seam allowances and turn the pouch wrong side out.  Using a slightly larger seam allowance, sew the same three sides together.  This encloses the raw edges within the seam.  Press the seam allowances.

Mark line 2" from bottom

Mark line 2″ from bottom

Making the hem

While the fabric s are still right sides together, mark a line 2″ from the edge along the open end of the pouch.  You need to do this on both fabrics.  Beginning at the side of the duvet cover, sew 6″ towards the middle along the marked line, sewing through both fabrics.  This will be the bottom corner of your cover.

Repeat on the other side.  You should now have a gap of about 40″ across the bottom of the pouch.

Turn under a double hem

Turn under a double hem

Create the bottom hem by turning the fabric up so that the edge of the fabric touches the 2″ line.  Then turn it up again so that the fold line is along the 2″ line and you have a 1″ double hem.  Make sure that you are only working with one layer of fabric at a time and do the same on both sides.

Popper tape

Popper tape

Add the popper tape

Turn the duvet cover right side out.  I find that this is safest, so that you can be sure that you are sewing the tape to the correct side of the fabric.  You want the tape to be lying along the hem on the inside (wrong side of fabric).

The popper tape comes in two lengths joined together by the poppers.  Turn under the end of the tape and pin one length to one side (eg red) and then do the same with the other piece of tape on the other side (blue).  Make sure that the poppers from one tape are opposite the poppers on the other tape so that you don’t have bumps in your fabric.

Sew the two tapes in place.  I began by using my normal sewing foot but soon had to change to my zipper foot because you haven’t got much room to sew around the poppers.  Even so, I still had a little bulge in the stitching around the poppers, but not enough for it to look untidy.

That’s it!  Making duvet covers really is that easy and I’m thrilled with mine.

Here’s the video:

Thanks for visiting my blog.

I hope to see you again soon.