I’ve made the Anvil Steps quilt using three different blocks within the quilt and a different block for the border. It’s the border that I’m most pleased with – something completely different for you to try. The quilt measures 58″ square and I’ve used 1.3/4 yards of white, 1.1/4 yards of red, 1 yard of light blue and 1//2 yard of dark blue fabrics. The blocks within the quilt are 12″ square finished size while the border blocks are 9″ square finished size.

You can buy the fabrics for this quilt at a discount in this week’s special offer.

### Cutting requirements for the anvil steps quilt

3.1/2″ squares: twenty dark blue, thirty six white, sixteen light blue

3.7/8″ squares: twenty dark blue, thirty six white, sixteen light blue

2.3/4″ squares: eight light blue, eighty white – these can be made with strip piecing

5.3/8″ squares: twenty red, twenty white

For the border you will need to cut six 2.1/2″ red strips across the width of fabric.

### Make the half square triangle units

Use both the 3.7/8″ squares and the 5.3/8″ squares to make half square triangle units in two different sizes. Place a coloured square right sides together with a white square and mark a line along the diagonal.

Sew a 1/4″ seam either side of the marked line and cut along the line. This will produce two half square triangles. Press the seam allowances away from the white and clip the two corners where fabric sticks out.

The blue and white squares are now 3.1/2″ square while the red and white squares are now 5″ square.

### Make the anvil quilt block

I began this quilt with the idea of the anvil quilt block because it’s a simple four patch block that goes together really quickly. Lay the blocks out in four rows of four. There’s a white square in each corner and four dark blue squares in the middle. On each edge of the central four patch place a pair of dark blue/white half square triangles. Place these so that so that the dark blue triangles form a butterfly shape across two corners. On the other two corners, the white triangles together with the white corner square form a larger white triangle.

Sew the squares together across each row and then sew the rows to each other. The block measures 12.1/2″ square at this stage and you need to make four of these.

### Make the alternate block

For the alternate block I wanted a block that was similar to the anvil block but had more of a vertical shape rather than a diagonal shape. So I played around with the same squares that make up the anvil block and came up with this alternate block.

Lay the squares out in four rows of four. You still have the white squares in the corners and the four blue squares in the middle. This time the half square triangles on the edges are placed differently. On two edges the light blue triangles together form a larger light blue triangle pointing away from the middle. For the other two edges, the white triangles together form a larger white triangle pointing towards the middle.

Sew the squares together across each row and then sew the rows to each other. The block now measures 12.1/2″ square and you need to make four in light blue and one in dark blue.

### Assemble the anvil steps quilt

Lay the blocks out in three rows of three. Make row one with an anvil block at each end and a light blue alternate block in the middle. Place the anvil blocks so that the diagonal lines point towards the middle. Place the alternate block so that the pointy bits point to either side.

Make row two with a light blue alternate block at each end and a dark blue alternate block in the middle. Place all three blocks so that the pointy bits point up and down.

Row three is similar to row one with an anvil block at each end and an alternate block in the middle. This time the diagonal shape of the anvil block is pointing outwards.

Sew the blocks together across each row and then sew the rows to each other to complete this section of the anvil steps quilt.

### Make the border blocks

I’ve used a smaller block for the border. In order to make the four patch units in this block you need to sew together 2.3/4″ strips of light blue and white. Cut these panels at 2.3/4″ intervals to make rectangles 2.3/4″ by 5″.

Lay four of the rectangles out as shown with the red/white half square triangles. The red triangles form two corners of the block. Place four of the light blue/white rectangles so that the light blue squares run along the diagonal.

Sew the rectangles together in pairs to make four patch units. Then sew one four patch unit to each half square triangle. Finally sew the two halves of the block together. The border block measures 9.1/2″ square at this stage and you need to make twenty of them.

### Add the first quilt border

You need to make two strips of four blocks for the top and bottom of the quilt. Rotate these so that the light blue squares form two peaks across the row. The red triangles will then form one larger red triangle in the middle pointing down and one larger red triangles each side pointing up. The strip for the bottom is the same but with the blue squares forming two V shapes.

That leaves twelve border blocks for the sides – two strips of six blocks each. Lay the first two blocks so that the blue squares follow the same diagonal as the last block in the top row. That means that around the top right hand corner you have three blocks with the blue squares running from top left to bottom right. Then add two blocks where they form a V against the side of the quilt top. Finally place the last two blocks so that the blue squares follow the same diagonal as the last block in the bottom row.

### Add the final border

Finally I have used 2.1/2″ strips of red fabric for the outer border. You’ll need two lengths of 54.1/2″ for the top and bottom and two lengths of 58.1/2″ for the sides. That completes the Anvil Steps quilt top. It is now ready for layering, quilting and binding. Full details of these steps can be found in the beginner quilting section.

Here’s the video:

I have a favour to ask – can you identify what these scissors are used for? They were in a box of scissors that my cousin gave me a few weeks ago and I’m curious to know what they are. The top one only has one circle for a finger and the bottom one has a square in the middle – most odd.

Since writing this, I have had many suggestions that the top pair are thread snips and the bottom pair are buttonhole scissors. I have also been sent this wonderfull informing link on how to use buttonhole scissors:

https://www.ebay.com/gds/How-to-Use-Buttonhole-Scissors-/10000000205702342/g.html

My travels this week took me to Coughton Court – another National Trust property that is a delight to visit. You can see more photos by clicking here or you can click on the photo.