Single Strip Cushion Cover – Easiest Cover Ever

Halloween cushion cover

Halloween cushion cover

The single strip cushion cover is easily the most simple and easy cushion/pillow cover you could hope to make.  It’s a great standby if you need to make something really quickly as a gift – or for charity sales.  It has an envelope closing at the back rather than a zip, which of course cuts the time enormously.  I’ve made it here to fit a 16″ cushion pad.

Cutting requirements for single strip cushion cover

One 16″ strip of fabric cut across the width of fabric




Mark the central panel

Mark the central panel

Make the single strip cushion cover

Finish the edges of your strip of fabric – I have used my serger, but you could zigzag or use pinking shears or whatever method you normally use.

Fold the fabric in half to find the midpoint and mark this with pins.  Measure up 8″ and down 8″ from the central line and mark these lines with pins as well.

Turn under a hem on each end

Turn under a hem on each end

Turn under a small hem on both the short edges.

Lay the fabric with right side up and fold the top edge down till the fold matches the top line that you marked with pins.

Fold the edges along the marked lines

Fold the edges along the marked lines

Repeat with the lower edge – fold it up until the fold matches the lowest line that you marked with pins.  Pin carefully down the sides, making sure that you catch all the layers of fabric.

Sew a seam down each side.  That completes the single strip cushion cover!  It really is the most simple method imaginable.

Single strip cushion cover

Single strip cushion cover

Remove the pins and pull the cushion cover right side out through the envelope opening.  Hindsight being a wonderful thing, I realise now that I should have cut the strip shorter before I began.  The trouble was that I was fixated on the idea of using one width of fabric.  In fact, I have ended up with more overlap than I would like, making it more difficult to insert the cushion pad.  If I was making this again, I think that I would cut about 6″ off the length of the fabric.  You can always make a small clutch bag with the bit that you cut off.

Just for fun, I made another single strip cushion cover using a see through Halloween fabric.  It’s a black organza type fabric with silver spiderwebs on it.  Because it’s see through the pink shows through and gives a very attractive cushion.  That’s the one in the photo at the top of the page.

Here’s the video:

Thanks for visiting my blog.

I hope to see you again soon.

Rose

%d bloggers like this: