For the Old Indian Trail quilt I have used two different blocks – the block of the same name and a simple alternating squares block. I think this is one of those blocks where you can see how it came by its name fairly easily. I feel that this quilt looks very much like a mosaic. The quilt uses sixteen blocks, all 15″ square finished size.

The quilt measures 64″ square and I have used 1/2 yard of blue fabric, 1.1/2 yards of red, 1 yard of yellow and 2 yards of white. You can buy these fabrics at a discount in this week’s special offer.

### Cutting requirements for the old indian trail quilt

3.1/2″ squares: forty eight red, forty eight white, twelve yellow

3.7/8″ squares ninety six red, ninety six white

For the alternate block you will need fifty two blue 3.1/2″ squares with forty eight white 3.1/2″ squares. Some of these can be strip pieced, so don’t cut the squares until you have read the pattern.

For the border you will need to cut six 2.1/2″ strips of yellow across the width of fabric.

### Make the half square triangles

My apologies for the number of half square triangles to those of you who don’t like making them! Place a red and a white 3.7/8″ square with right sides together. Mark a line along the diagonal and sew a 1/4″ seam either side of the marked line. Cut along the line to produce two half square triangle units. These are now 3.1/2″ squares. Press the seam allowances towards the red and trim the two corners where fabric sticks out.

### Make the old indian trail quilt block

The central section of this block is a simple nine patch unit. Place three red squares along one diagonal with two white squares in the remaining two corners. Add four half square triangle units around the central square. Place these so that the red triangles form that large red stripe running down the diagonal.

Now it’s easy to add the outer frame of the block. Add two white squares in the top left and bottom right corners. Place a red and a yellow square in the other two corners.

Between each pair of corners lay three half square triangle units. Across the top and down the right hand side place the red triangles bottom left of their squares. Down the left hand side and across the bottom place the red triangles top right of their squares.

Sew the squares together across each row and then sew the rows to each other to complete the Old Indian trail quilt block. It measures 15.1/2″ square at this stage and you need to make twelve of these.

### Make the alternate block

For the blocks in the corners of the quilt I have used alternating blue and white squares. Some of these can be made by strip piecing – sew together a blue and a white 3.1/2″ strip along the length. Cut this panel at 3.1/2″ intervals. This gives you rectangles 6.1/2″ by 3.1/2″ which are basically a square each of blue and white.

These can be used for part of the block, but as you need five squares across each row you will also need individual squares to complete the block.

Sew the squares together across each row and then sew the rows to each other. The block now measures 15.1/2″ square and you need to make four of these.

### Assemble the Old Indian trail quilt

Sew the blocks together in four rows of four. In the first row place an alternate block at each end. Place the two Old Indian blocks in the middle of the row so that the red stripes form a peak in the middle. The yellow squares lie side by side at the bottom of the row.

For the second row you need four old indian trail quilt blocks. Place the first two so that the red stripe runs from bottom left to top right with the yellow squares in the bottom right corner. Lay the second two blocks so that the red stripe runs from top left to bottom right with the yellow squares in the bottom left corner.

Row three is similar to row two, but the red stripes run from top left to bottom right for the first two blocks. The yellow squares are in the top right position. Place the second two blocks so that the red stripes run from bottom left to top right with the yellow squares in the top left corner.

Finally make row four with an alternate block at each end and two old indian trail quilt blocks. Place these so that the red stripes form a V and the yellow squares lie together at the top of the row.

Sew the blocks together across each row and then sew the rows to each other.

### Add the Old Indian Trail quilt border

Use 2.1/2″ strips of yellow for the border. Make two lengths of 60.1/2″ for the top and bottom and two lengths of 64.1/2″ for the sides.

That completes the Old Indian trail quilt top. It is now ready for layering, quilting and binding. Full details of these steps can be found in the quilting for beginners section.

Here’s the video:

A short while ago I visited Dudmaston Hall, which is another National Trust property. It was of course absolutely beautiful, but what I enjoyed most about it were the many walks in the parkland around it.

It would have been possible to keep taking different walks for a very long time.

An added bonus was that they had a few rose plants for sale. One of them, called Olivia I think, had an exquisite perfume. It reminded me that the David Austen Rose Centre isn’t too far from here. Definitely time that I paid them a visit!

PS. Since I wrote this pattern I have had an operation to remove a lump from my hand. I thought that the consultant would stitch it up and slap a sticking plaster on it. However my hand is quite swollen and I don’t think that I will be able to make a quilt pattern next week. So the next one will be on Friday 11th August.