Oslo Norwegian Quilt – Free Pattern

Oslo Norwegian quilt

Oslo Norwegian quilt

I made the Oslo Norwegian quilt based on my recent travels.  The block for the central part of the quilt comes from a floor tile design that I saw in Oslo Cathedral.  It measures 76″ square.

Original tile pattern

Original tile pattern

I wanted to brighten up the design and make it fresh and cheerful for the beginning of the New Year so I have surrounded  the central area with diamond frames in blue and red together with lots and lots of white.  It’s a large quilt, but the individual blocks are very easy to make.

I’ve used sixteen blocks which are all 18″ square finished size. In order to make the quilt I needed 1 yard each of dark blue and red, 1.1/2 yards of light blue and 3 yards of white.  You can buy these fabrics at a discount in this week’s special offer.  I’m also holding a sale throughout the next seven days – details at the bottom of the page.




 

Completed quilt blocks

Completed quilt blocks

Cutting requirements for the Oslo Norwegian quilt

3.1/2″ squares:  one hundred and thirty six light blue, twenty four white, seventy two red – these can be made with strip piecing, so don’t cut them till you’ve read the pattern

3.7/8″ squares:  sixteen dark blue, sixteen red, eight light blue, forty white

6.1/2″ by 3.1/2″ rectangles:  forty white

9.1/2″ by 3.1/2″ rectangles:  twenty four white

12.1/2″ by 3.1/2″ rectangles:  twenty four white

For the border you will to cut eight 2.1/2″ dark blue strips across the width of fabric.

Make half square triangles

Make half square triangles

Make half square triangle units

Use all the 3.7/8″ squares to make half square triangle units.  Place a white square with either a dark blue, light blue or red square, right sides together.

Mark a line along one diagonal.  Sew a 1/4″ seam either side of the marked line and cut along the line.  This produces two half square triangle units which are now 3.1/2″ squares.  Press the seam allowances towards the coloured fabric and trim the two corners where fabric sticks out.

Central area of the Oslo quilt block

Central area of the Oslo quilt block

Make the Oslo quilt block

For the central area of this block, you need to place four light blue/white half square triangles together to make a four patch unit.  Place them so that the blue is always in the middle, creating a blue diamond in a white square.

Add the next frame

Add the next frame

Make the frame around this area using light blue squares in the corners with a pair of red/white half square triangles on each edge of the central area.  Place these so that the white triangles form a larger white triangle pointing towards the middle.

Oslo quilt block layout

Oslo quilt block layout

The outer frame of the Oslo block is very simple.  Place a 6.1/2″ white rectangle on either side of a pair of dark blue/white half square triangles.  This is the same in rows one and six, but note that the blue triangles always point away from the middle.

Down the sides place a white square either side of two dark blue/white half square triangles.

Sew the squares together across each row and then sew the rows to each other to complete the Oslo quilt block.  It now measures 18.1/2″ square and you need to make four of these.

Use strip piecing

Use strip piecing

Make the alternate quilt block

For this block I have used strip piecing for speed.  Sew together a 3.1/2″ strip of light blue and red fabrics to make one panel.  Sew together 3.1/2″ strips of light blue, red, light blue to make the second panel.

Cut these panels at 3.1/2″ intervals to make rectangles consisting of either two or three squares.  These are 3.1/2″ wide by either 6.1/2″ or 9.1/2″ long.

Alternate quilt block layout

Alternate quilt block layout

Lay the sections out for the alternate block in six rows.

The first and sixth rows contain a blue/red strip with a 12.1/2″ white strip.  In the first row place the red/blue on the right.  In the sixth row the blue/red is on the left.  Make sure that the red square is always on the diagonal line.

Lines two and five contain one blue/red/blue strip together with a 9.1/2″ white rectangle.  For lines three and four you need one blue/red/blue strip with a white square on one side and a 6.1/2″ white rectangle on the other side.  It’s easy enough to check your placements by making sure that the red continues down the diagonal.

Sew the patchwork pieces together across each row and then sew the rows to each other.  This block is also 18.1/2″ square at this stage and you need to make twelve of them.

First 2 rows of the Oslo Norwegian quilt

First 2 rows of the Oslo Norwegian quilt

Assemble the Oslo Norwegian quilt

Sew the blocks together in four rows of four.  Make row one with four alternate blocks.  In the first two blocks the coloured diagonal runs up from bottom left to top right.  For the last two blocks the coloured diagonal runs down from top left to bottom right.

In row two place two Oslo blocks in the middle with an alternate block at each end.  Match the coloured diagonals to the blocks in row one.

Rows three and four

Rows three and four

Rows three and four are similar, but forming the bottom of the diamond frames.  In row three place two Oslo blocks in the middle with an alternate block at each end.  Place the alternate blocks so that the coloured diagonals run from the sides towards the middle.

Make row four with four alternate blocks, matching the coloured diagonals to the block above.

Sew the blocks together across each row and then sew the rows to each other.

Border in dark blue

Border in dark blue

Add the quilt border

I’ve used 2.1/2″ strips of dark blue fabric for the border.  You’ll need two lengths of 72.1/2″ for the top and bottom and two lengths of 76.1/2″ for the sides of the quilt.

That completes the Oslo Norwegian quilt top.  It is now ready for layering, quilting and binding.  Full details of these steps can be found in the quilting for beginners section.

Here’s the video:

As I stated above, I’m holding a New Year sale from Friday 5th January to Thursday 11th January.  I’m offering an 18% discount across the shop on all orders over £5.  There is no coupon code required – the discount will be applied automatically when you check out.  Take a look at the shop here.

I have a favour to ask while you are looking:  I have made some tote bags with slogans on them and I’d really appreciate your comments on them – what you think of colour, font, design or any slogans that you think would look good.  I’d really appreciate your views.

18% DISCOUNT:  CLICK HERE

San Marco Quilt – Free Pattern

San Marco quilt

San Marco quilt

The San Marco quilt is the result of a quick trip I took to Venice last week.  It’s the most beautiful, inspirational city:  I’ve added a link to my Venice photos at the bottom of the page – together with a short video of a gondolier serenading his passengers.  This quilt is based on a small portion of the incredible floor tile designs that I saw in the San Marco basilica.

The quilt is rectangular, measuring 67″ by 85″, and I have used 3 yards of grey fabric with 1.1/2 yards each of red and black.  I’ve made sixty three blocks, all 9″ square finished size.  You can buy these fabrics at a discount in this week’s special offer.

Floor tile mosaic

Floor tile mosaic

The combination of a plain square with a diamond in a square is quite common in these floor tiles – you can see it in diagonal lines at the bottom of this photo.  It formed the basis of many of the designs.

The fact that there are plenty of plain grey squares make it a simple and quick quilt to make.  I have added the red part of the quilt design to give it some pop.




Completed quilt blocks

Completed quilt blocks

Cutting requirements for the San Marco quilt

9.1/2″ squares:  twenty eight grey

6.7/8″ squares:  sixteen grey, fourteen red

5.3/8″ squares:  sixty black

3.7/8″ squares:  ten red, ten grey

3.1/2″ squares:  twenty grey, five red

Make half square triangles

Make half square triangles

Make the half square triangle units for the stars

Use the 3.7/8″ squares to make half square triangle units.  Place a red and a grey square with right sides together and mark a line along the diagonal.  Sew a 1/4″ seam either side of the marked line and cut along the line.  This will produce two half square triangle units which are now 3.1/2″ squares.

Press the seam allowances towards the red fabric and trim the two corners where fabric sticks out.

Star quilt block layout

Star quilt block layout

Make the star quilt blocks

Lay the 3.1/2″ squares and the half square triangles out in a nine patch formation.  There’s a red square in the middle, a grey square in each corner and half square triangles in the remaining spaces.  Check the photo to be sure of getting the triangle placements correct.

Sew the squares together across each row and then sew the rows to each other.  You need to make five of these star blocks.

Sew the triangles to the squares

Sew the triangles to the squares

Make the diamond in a square blocks

Cut the 5.3/8″ black squares along one diagonal to create two triangles from each square.  Lay a triangle on each edge of the central 6.7/8″ square.  Sew the top and bottom triangles to the square first.  Then press these open and sew the remaining two triangles in place.

Trim the triangle tips

Trim the triangle tips

You will see that there are triangle tips sticking out in the middle of each edge.  Trim these to reduce bulk when you’re sewing the blocks together.

You need to make sixteen of these blocks in grey on black together with fourteen blocks in red on black.

The other block required is a plain 9.1/2″ grey square.

First three rows

First three rows

Assemble the San Marco quilt

Sew the blocks together in nine rows of seven blocks.  I’ll show you the rows three at a time.  In the first and third rows place the plain grey squares in positions one, three, five and seven.  The second row contains grey squares in positions two, four and six.  Place a red diamond in square in the middle of the first row with two red diamonds diagonally below it in row two.  Continue the diagonal lines with two red diamonds in row three.  Fill the remaining spaces with grey diamonds – two each in rows one and two with just one in the third row.

Rows four to six

Rows four to six

Rows four to six form the central area of the quilt.  Place a star in the middle of rows four and six, with three stars in row five.

There are two plain grey squares in each of these rows, together with two grey diamonds in each row.  The red diamonds appear twice in each of rows four and six but there are none of them in row five.

Rows seven to nine

Rows seven to nine

Finally, rows seven to nine are very similar to rows one to three.

The red diamonds are now forming a V shape to complete the overall diamond shape begun in the top of the quilt.

Sew the blocks together across each row and then sew the rows to each other.

Add the quilt border

Add the quilt border

Add the quilt border

For the border I have used 2.1/2″ strips of red fabric.  You’ll need two lengths of 63.1/2″ for the top and bottom of the quilt, with two lengths of 85.1/2″ for the sides.

That completes the San Marco quilt top.  It is now ready for layering, quilting and binding.  Full details of these steps can be found in the quilting for beginners section.

Here’s the video:

Venice

Venice

Last week I had a magical few days in Venice.  I had so many photos that I’ve written a separate article about the gorgeous city.  Click here to see my photos and a very short video of a singing gondolier.

 

%d bloggers like this: